Fischer 519783 Hollow wall plug HM 8 x 54 SS with screw hex head 50 pieces

Fischer 519783 Hollow wall plug HM 8 x 54 SS with screw hex head 50 pieces

Features

• The fischer Metal Hollow Wall Plug HM-SS is a versatile hollow wall plug with hexagonal screw for all sheet materials.
• The plug is inserted into the pre-insert assembly with the fischer Hollow Wall Plug Pliers HM-Z 1.
• The pliers are used to pull the plug into the cavity behind the sheet metal.
• In doing so, the arms spread out behind the sheet metal, distributing forces over a large area.
• The fischer Metal Hollow Wall Plug HM-SS is suitable for fastening lighting, shelving, light mirror cabinets and substructures in interior construction.

Advantages

• Due to its wide range, the HM is suitable for sheet material with a thickness of 3-50 mm, allowing it to be used for numerous applications.
• The attachment can be assembled and disassembled multiple times due to the metric female thread.
• This makes the HM very flexible. The spreading arms of the HM provide a large contact surface allowing high loads.
• The barbs under the collar of the plug penetrate the sheet metal, preventing the plug from turning with the drill hole and ensuring safe installation.

Characteristics

• Complete with hex head screw with metric threads.
• Flexible in assembly: the screw can be loosened and tightened again.
• Does not twist: The wings (claws) on the edge of the plug hold it firmly in the sheet metal.
• Holds even heavy objects in sheet metal due to the large contact area of the spreader arms.
• Suitable for front-pitch mounting.

Building Materials

• Gypsum board and gypsum fiber boards Channel boards Light sheets of wood wool Chipboard Plywood

Applications

• Paintings Lamps Small shelves Towel racks Mirror cabinets Curtain rails Substructures

Assembly

• The HM hollow wall plug is suitable for pre-cut mounting
• The fastener should be selected based on the thickness of the sheet material so that the arms can spread out over as large an area as possible.
• During assembly, the arms spread out and press themselves onto the back of the sheet material.
• The HM can be mounted with mounting pliers.
• When using a cordless screwdriver or screwdriver, remove the pre-mounted screw first.
• When screwing in and spreading the arms, the attachment or plate thickness of no more than 6 mm should be used to prevent the hollow wall plug from turning with the hole.

Technical data

• Drill hole diameter: 12 mm
• Sheet thickness 7 - 21 mm
• Plug length 54 mm.
• min. drill hole depth 60 mm.

Includes

• 50 pieces