Fischer 530934 Frame/construction plug SXRL 14 x 120 T stainless steel A4 50 pcs.

Fischer 530934 Frame/construction plug SXRL 14 x 120 T stainless steel A4 50 pcs.

The Fischer construction plug SXRL-T A4 with the Fischer countersunk head screw with T50 recess is approved for multiple fixings of non-load bearing systems in masonry, concrete and aerated concrete. In masonry made of perforated brick, the spreading zones of the dowel ensure an even force distribution; in aerated concrete and solid material, they join together to form a long spreading element. With its locking bolt made of stainless steel, the construction plug is particularly suitable for external fastening, such as facade, ceiling and roof constructions.

Benefits

• The long spread element with several anchoring depths of 70 and 90 mm makes the SXRL a versatile product
• The special geometry of the plug ensures that the fastening forces are evenly distributed over the walls of the drilled hole
• For anchoring in perforated and solid construction materials, the two spread zones achieve optimum fastening values
• If the plug is placed deeper, the longer ribs prevent the plug from turning during installation
• The SXRL 14 is also approved for applications that are subject to pressure and may be used for façade constructions that are remotely mounted without wall brackets

Applications

• Perforated brick
• Cellenbeton
• Lightweight concrete hollow block
• Perforated sand-lime brick
• Thermal insulation blocks
• Solid building block of normal and lightweight concrete
• Solid brick
• Solid sand-lime brick
• Concrete >= C12/15
• High density natural stone
• Gypsum blocks

Building materials

• The SXRL is suitable for through hole mounting
• In masonry made of perforated stone, the two spreading zones guarantee a force distribution that protects the substrate. Due to the second spreading zone, perforated stone sills are not irreparably damaged and can therefore be used to further disperse the forces
• The two spread zones merge into one long spread element in aerated concrete and solid construction materials and guarantee an even distribution of the load in the subsoil, which is distributed over the surface
• Ideally suited for securing wooden structures
• For metal constructions we recommend the use of dowels with a wide shanked edge and hexagonal screws with a preformed washer

Specifications

• DIBt approval : Relevant
• Approval : relevant
• Drill diameter : 14 mm
• Plug length : 120 mm
• Min. borehole depth for through hole mounting : 135 mm
• Usable length at anchoring depth 70 : 50 mm
• Usable length at anchoring depth 90 : 30 mm
• Intake : T50
• Contents : 50