Fischer 553133 Mobibox FIS VS 300 T KPM 3 Injection mortar set

Fischer 553133 Mobibox FIS VS 300 T KPM 3 Injection mortar set

The promo includes the well-known toolbox, the fischer injection mortar FIS VS 300 T mixer and a high quality fischer injection gun. The FIS VS 300 T is the versatile injection mortar for a.o. in masonry, cracked - and non-cracked concrete.

Features

The fischer Injection Mortar FIS V is the universal all-rounder which meets the highest requirements. The styrene-free vinylester hybrid mortar with its numerous fastening elements is approved for
fixings in cracked and uncracked concrete as well as masonry. The injection mortar is also used with the approved system components for connections to reinforcing steel, the fischer
Renovation anchors VBS 8, the fischer weatherproof renovation anchor FWS and the distance fitting Thermax are used.

Benefits

• Injection mortars FIS V are approved for many systems, e.g. in cracked and uncracked concrete, masonry and for connections to reinforcing steel
• The extensive range of accessories is optimally matched to the FIS V injection mortar family and increases the system's flexibility
• FIS VW HIGH SPEED has a significantly shorter curing time than FIS V and therefore ensures smooth work progress even at low temperatures
• FIS VS LOW SPEED with a longer application time prevents premature hardening of the mortar at higher temperatures and is optimally suited for deeper boreholes

Applications

• Steelwork constructions, Timber constructions, Handrails, Facade systems, Stairs, Steel brackets, Machinery, Masts, Awnings, Fencing, Consoles, Pipelines, Grids, Satellite antennas
• Approved for anchoring concrete C20/25 to C50/60, cracked and uncracked, lightweight concrete hollow brick, concrete hollow brick, perforated brick, perforated sand-lime brick,
• Solid sand-lime brick, Aerated concrete, Solid brick
• Approved for bonding, Renovation anchor VBS 8, Renovation system FWS II, Thermal separation Thermax
• Approval ETA-02/0024 ETA-10/0383 ETA-10/0383 DoP No. 0007 DoP No. 0007 - EN DoP No. 0026 DoP No. 0072 DoP No. 0094 - EN DoP No. 0126 DoP No. 0756-CPD-0301 DoP No. 0756-CPD-0361 EPD-FIS-20130268-IBG1-EN

Montage

• FIS V is a 2-component injection mortar on vinylester-hybrid base
• The resin and hardener components are stored in two separate chambers and are not mixed and activated until they are pressed out of the mixing nozzle
• The mortar is injected from the bottom of the borehole without bubbles
• The mortar sticks the fastener with its entire surface to the wall of the borehole, thus sealing the hole
• The injection cartridges can be used with fischer caulking guns with little effort and very quickly
• Broken cartridges can be reused when the mixing nozzle is replaced

Specifications

• Languages on label: D, GB, F, NL, E, P

Includes

• 1x Mobibox toolbox
• 3x injection mortar FIS VS 300 T
• 6x mixing nozzle FIS MR Plus
• 1x KPM3 injectiepistool

Picture is slightly different!