Fischer 90246 Sleeve steel anchor TA M 8 zinc plated sta 50 pcs

Fischer 90246 Sleeve steel anchor TA M 8 zinc plated sta 50 pcs

The easy to install internal threaded anchor with low edge and spindle distances for fixing in uncracked concrete. The fischer TA M sleeve anchor is a galvanised steel internal threaded anchor for use in front of a push-in connection. During assembly the cone is pulled into the spread sleeve and clamps against the wall of the drilled hole. The plastic cap protects the thread from soiling. This way it always remains well movable. The sleeve anchor is very suitable for fixing fall arrest devices, installations and machines in uncracked concrete.

Benefits

• The optimised geometry minimises the energy required for heating and therefore allows use in extremely confined spaces
• This allows for user-friendly installation
• The triple-spread sleeve allows even force distribution with small centre-to-centre and edge-to-edge distances
• This makes the TA M extremely flexible
• The metric internal thread allows the use of standard screws or threaded rods for ideal adaptation to the intended use
• The red plastic cap offers protection against soiling and thus ensures that the wire can run freely

Characteristic properties

• Easy installation due to minimal effort during application
• Minimal spindle and edge distances due to uniform load introduction
• Mounting directly on the surface is possible by loosening screw connections
• High degree of flexibility through the use of common bolts and threaded rods
• ETA approval for uncracked concrete

Applications

• Steel constructions, Railings, Consoles, Ladders, Cable trays, Machinery, Stairs, Fencing, Facade systems, Distance mounted constructions

Building materials

• Approved for: Concrete C20/25 to C50/60, uncracked Also suitable for: Concrete C12/15 High density natural stone

Approval

• DoP No. 0756-CPD-0289

Montage

• The TAM is suitable for frontal mounting
• When torque is applied, the cone is pulled into the spreader clamp, clamping it against the borehole wall
• For correct installation check that the push-through anchor TA M can be supported on the fixing, or that the threaded rod is held up

Specifications

• Drill hole diameter d0 12 [mm]
• Min. borehole depth h1 70 [mm]
• Plug length l 56 [mm]
• Draad M 8

Includes

• 50 pieces