Fischer 90248 Sleeve anchor TA M 12 electrolytically zinc plated sta 25 pcs.

Fischer 90248 Hulsanker TA M 12 elektrolytisch verzinkt sta 25 pieces

The assembly-friendly impact anchor with internal thread with low edge and axis distances for fixings in uncracked concrete. The fischer Sleeve anchor TA M is an impact anchor with internal thread made of galvanized steel for pre-piercing installation. During assembly, the cone is pulled into the spreader sleeve and tightens against the wall of the drilled hole. The plastic cap protects the thread from contamination. Thus, it always remains properly movable. The sleeve anchor is very suitable for fixing fall protection devices, installations and machines in uncracked concrete.

Advantages

• The optimized geometry minimizes zinc energy and thus enables use in extremely small spaces.
• This allows for user-friendly assembly.
• The triple-spreading sleeve allows even force distribution with small center-to-center and edge distances.
• This makes the TA M extremely flexible.
• The metric internal thread allows the use of standard screws or threaded rods for ideal adjustment for the intended use.
• The red plastic cap provides protection against contamination and thereby guarantees that the wire can run freely

Characteristics

• Easy assembly due to little effort during application.
• Low shaft and edge distances due to uniform load introduction.
• Assembly recht aan het oppervlak mogelijk door los te draaien schroefverbindingen.
• High degree of flexibility through the use of common bolts and threaded rods.
• ETA approval for uncracked concrete.

Applications

• Steel structures, Railings, Consoles, Ladders, Cable trays, Machinery, Stairs, Fencing, Facade systems, Distance mounted structures.

Building Materials

• Approved for: Concrete C20/25 to C50/60, uncracked Also suitable for: Concrete C12/15 High-density natural stone

Approval

• DoP No. 0756-CPD-0289

Assembly

• The TAM is suitable for front-panel mounting.
• When torque is applied, the taper is pulled into the spreader clamp, clamping it against the borehole wall.
• Before correct installation, check that through-hole anchor TA M can be supported on the fastener, or that the threaded rod is stopped.

Technical data

• Drill hole diameter d0 18 [mm]
• Min. drill hole depth h1 105 [mm].
• Plug length l 86 [mm]
• Wire M 12

Includes

• 25 pieces