Fischer 90281 Anchor rod FIS A M 10 x 150 ev steel grade 5.8 10 pieces

Fischer 90281 Anchor rod FIS A M 10 x 150 ev steel grade 5.8 10 pieces

The Fischer Threaded rod FIS A is made of galvanized steel in the steel grade 5.8. The threaded rod is a system component for the various Fischer Injection Mortars. In combination with the injection mortars, the Fischer Threaded rod is suitable and approved for any substrate. For the maximum load capacity of the system, a thorough cleaning of the borehole is recommended. The system of galvanized anchor rod in combination with Fischer Injection Mortars is suitable or approved for fixing in dry indoor areas.

Benefits

• The fixing system, consisting of the threaded rod FIS A or the internal threaded anchor FIS E and one of the injection mortars FIS V, FIS VT or FIS P Plus, can be selected to suit the application requirements and allows for a wide range of applications
• The application possibilities of approved threaded rods FIS A from M6 to M30 are numerous

Applications

• In combination with various Fischer Injection Mortars, the Anchor Rod FIS A is approved or suitable for various substrates

Building materials

• The threaded rod FIS A is suitable for front and side installations
• The threaded rod FIS A is pushed by hand lightly into the bottom of the borehole

Specifications

• Approval : relevant
• Drill hole diameter in perforated brick : 16 mm
• Drill hole diameter in solid brick : 12 mm
• Wire : M 10 mm
• Length : 150 mm
• Contents : 10