Fischer 94432 Huls steel anchor TA M8/120 NL 25 pcs.

Fischer 94432 Huls steel anchor TA M8/120 NL 25 pcs.

Anchor for use in hollow core slabs, without technical approval. The fischer Sleeve anchor TA M NL is a sleeve anchor with internal thread suitable for temporary fixing in hollow-core slabs. The optimised anchor geometry minimises the energy required for installation. The cone is drawn into the spreader sleeve during installation and then thrust into the channel wall. The triple spreading sleeve guarantees an even load distribution. After disassembly, no protruding parts remain in the drilled hole, thus avoiding the risk of accidents.

Benefits

• The fischer TA M-NL sleeve anchor is suitable for use in hollow core slabs with a shield thickness ≥ 40 mm
• The fischer TA M-NL sleeve anchor is multifunctional
• There are versions for both pre-piercing and through-piercing and the anchor can be dismantled (the sleeve remains in the concrete)
• The anchor is available as standard in electrolytic galvanised steel

Characteristic properties

• Easy installation due to minimal effort during application
• Very suitable for temporary anchoring of struts in hollow-core slabs
• No protruding parts after disassembly

Applications

• Temporary anchoring of struts in hollow-core slabs

Building materials

• Suitable for: Concrete C12/15, High density natural stone, Channel board floors

Montage

• The TAM NL is suitable for pass-through mounting
• When tightening, the cone is drawn into the sleeve, causing it to clamp against the borehole wall
• The drilling process is decisive for the strength of the attachment. It is essential that the shield thickness is not further reduced by shearing off the concrete at the rear of the borehole
• We recommend gently pre-drilling with a drill bit diameter 10 mm and then post-drilling with the prescribed drill bit diameter

Specifications

• Drill hole diameter d0 12 [mm]
• Plug length l 120 [mm]
• Thread Ø x length M 8 [mm]

Includes

• 25 pieces