Fischer 536853 Screw for concrete ULTRACUT FBS II 8 x 80 30/15 US hexagon, with U-ring , TX internal thread 50 pcs.

Fischer Screw for concrete ULTRACUT FBS II 8 x 80 30/15 US hexagon, with U-ring , TX internal thread 536853 50 pcs.

De sterke betonschroef voor optimaal montagecomfort. De fischer FBS II is de betonschroef voor optimaal montagecomfort. The special tooth geometry allows for fast embedding in concrete. Bij montage in plafond of vloer hoeft het boorgat niet schoonmaakt te worden. Dankzij de nationale goedkeuring is een meervoudige gebruik bij tijdelijke verankeringen, bijv. bij bekistingswerkzaamheden geen probleem. Voor de montage van de muurbout wordt een tangentiële slagschroefmachine met een voor de slagschroevendraaier geschikte bit of een speciale TX-bit aanbevolen. De betonschroef kan bijvoorbeeld uitstekend voor het bevestigen van leuningen, botsbeveiligingen, consoles of bekistingen worden gebruikt.

Benefits

• High degree of flexibility in terms of load and thickness of the mounting elements through up to two approved screw-in depths
• The special tooth geometry allows for fast embedding in concrete
• Drill holes do not need to be cleaned when mounting in ceilings or in the floor or when using hollow drills with extraction
• The spreader-free anchoring (rear cutting) allows for small edge and axis distances
• The ETA approval covers the application in cracked concrete as well as the seismic performance categories C1 and C2
• The approval compliant adjustment allows the concrete screw to be loosened 2x, placed slightly below the mounting piece and/or aligned
• The national approval regulates the multiple use in case of temporary anchoring, (e.g. in case of shuttering works)

Characteristic properties

• Hexagon socket head screw
• Fast tightening due to special tooth geometry
• Approved for multiple use in temporary anchorages
• ETA approval for cracked concrete: maximum safety
• When mounting in ceilings or in the floor, the borehole does not need to be cleaned

Applications

• Handrails Consoles/Footplates, Metal profiles, Scaffolding, Driveway protection, Outriggers/beam anchors, Temporary assembly of e.g. construction equipment, Formwork props

Building materials

• Approved for: Concrete C20/25 to C50/60, cracked and uncracked Also suitable for: Concrete C12/15 Solid building materials

Approval

• ETA-13/0352 DoP No. 0078 - EN Z-21.8-2049

Montage

• The FBS II is suitable for through hole mounting
• When drilling into ceilings and floors, it is not necessary to clean the drill hole. When drilling into floors, drill 3x deeper than the drilling diameter
• A tangential impact screwdriver with a bit suitable for the impact screwdriver or a special TX bit is recommended for installation
• If the screw head is in contact with the mounting piece, the screw has been mounted correctly (visual check of the mounting)

Specifications

• Approval
• DIBt approval
• Drill hole diameter d0 8 [mm]
• Min. borehole depth for through hole mounting h2 90 [mm]
• Screw dimensions ds x ls 10 x 80 [mm]
• Recording TX40/SW13

Includes

• 50 pieces