Fischer 047306 Zykon impact anchor FZEA II 10 x 40 M8 A4

Fischer Zykon impact anchor FZEA II 10 x 40 M8 A4 047306

Features

• The fischer Zykon weft anchor FZEA II is a weft anchor with internal thread made of stainless steel
• In one work cycle, the back-cutting drill hole is drilled using the special FZUB drill bit
• The rear cutting anchor is placed in the time-saving push-through assembly
• With the installation aid FZED Plus the spreader sleeve is pushed over the cone by means of the tapping of the spreader pin
• It completely fills up the borehole that was cut behind
• The fischer Zykon impact anchor FZEA II is suitable for outdoor fixing of e.g. pipes, cable ducts and ventilation systems in cracked concrete
• The internal threaded anchor made of stainless steel with low bonding depth for individual fixings in cracked concrete
• The fast stroke assembly
• Maximum safety through appropriate connection
• High degree of flexibility due to the use of common metric bolts and threaded rods
• Made of stainless steel for outdoor fixings
• ETA approval for cracked concrete and fire resistance class R 120
• The impactor with back-cutting ZYKON technology for individual fixing in cracked and uncracked concrete
• The combination of weft and back-cutting ZYKON anchors allows for individual fixing in cracked concrete
• The special rear-cutting ZYKON technology reduces the energy required to insert the anchor, making installation more economical
• The special drill FZUB allows a quick assembly by making the rear cut without changing tools
• The marking made during spreading of the anchor ensures easy control of the anchorage
• The anchor is installed with virtually no spreading pressure, enabling short shaft and edge distances and therefore flexible use
• The FZEA II is suitable for through hole mounting
• The undercutting hole is made using the special FZUB drill bit
• After placing the anchor in the borehole, the anchor sleeve is spread by inserting the internal tension pin using the FZED Plus assembly tool; the undercut borehole is filled with a positive form fit

Specifications

• Approval: relevant
• Drill required: FZUB10 x 40
• Required mounting device: FZED plusFZED 10 plus
• Length: 43mm
• Internal thread: M8
• Max. screw-in depth: 17mm
• Min. screw-in depth: 11mm
• Packaging Unit: Box

Applications

• Concrete C20/25 to C50/60, cracked and uncracked
• Concrete C12/15
• High density natural stone

Includes

• 100 stuks