Griffon 6305082 PVAC Wood Glue VB20 bottle 750ml (D3)

Griffon 6305082 PVAC Wood Glue VB20 bottle 750ml (D3)

Special features

• For indoor and outdoor use
• Waterproof (EN 204 D3)
• Transparent after drying
• Solvent-free
• Paintable
• Water-resistant, white wood glue based on PVAC
• For water-resistant (D3) bonding and lamination of virtually all soft, hard and exotic woods
• Applicable for well-fitting, non-load-bearing wood constructions using various wood joints, such as finger-joints, dovetails, mortise-and-tenon joints, dowels and springs
• Suitable for indoor and outdoor applications (outdoor areas not exposed to weathering), such as window frames, doors and furniture in, for example, living rooms, offices, kitchens and bathrooms

Technical data

• For surface bonding of wood, soft and hardboard, chipboard, plywood, MDF, paper, cardboard and board
• Also for laminating veneers and hard plastic sheet (HPL, Formica, Duropal, Resopal) on wooden substrates
• Remove wet adhesive residues immediately with water. Dried adhesive residue can only be removed mechanically.
• Beware of corrosion of metals (e.g. pump/machine parts). Use acid-resistant components when machining.
• Consumption: 5-7 m²/kg, applied unilaterally, depending on the nature of the materials
• Contents: 750 g

User Manual

• Apply adhesive thinly and evenly to one or both parts using fine notched notched notched trowel (1 mm), brush or roller
• Allow glue to soak in for a few minutes
• Assemble and clamp or press connection within 8 minutes
• The temperature of environment, adhesive and materials to be bonded should not be lower than +5°C
• Relative humidity of up to 65%. Wood moisture content between 8% and 12%
• The surfaces to be glued must be clean, dry and dust-free
• Degreasing oily woods in advance
• Store in tightly closed container in a dry place at a temperature between +10°C and +20°C