Griffon 6315513 Silicone Sanitary S-200 300 ml silver gray

Griffon 6315513 Silicone Sanitary S-200 300 ml silver gray

Special features

• Very fast curing
• Easy to apply
• 100% silicone
• Neutral, acid-free
• Odorless
• Anti-fungal
• Permanently elastic
• Waterproof
• Salt and chemical resistant
• Colorfast
• UV-resistant
• High-quality, acid-free, neutral silicone sealant for acrylic bathtubs and plastic shower walls
• Impervious to mold, waterproof, permanently elastic and colorfast
• Suitable for sealing seams, joints and gaps in bathroom, shower, toilet and kitchen, among others
• Ideal for acrylic bathtubs, plastic shower trays and shower walls
• Adheres to plastics (acrylic/PVC), (glazed) tiles, enamel, ceramics, various metals (aluminum/RVS) and glass, among others

Technical data

• Not suitable for polyethylene (PE), polypropylene (PP), PTFE and bitumen
• Remove stains immediately with white spirit. Cured sealant can only be removed mechanically or with GRIFFON Silicone Remover.
• Contents suitable for about 8-15 meters (depending on the diameter of the joint)
• Store in tightly closed container in a dry place at a temperature between +5°C and +25°C
• Contents: 300 ml

User Manual

• Provide a minimum joint width of 6 mm and a maximum of 20 mm
• The joint depth depends on the joint width. Up to 12 mm joint width, maintain a joint depth of 6 mm. Above that, the joint depth is half the joint width.
• Apply sealant evenly and smooth with mild soap solution within 10 minutes (using GRIFFON Silicone Finish and Multitool)
• Remove the applied painter's tape immediately after smoothing it out
• Silicones harden under the influence of humidity. Therefore, contact with atmospheric moisture is absolutely necessary during curing
• Sealant is loadable with water after 2 hours, but do not touch or apply mechanical load
• Use only at temperatures between +5°C and +40°C.
• The substrate must be thoroughly dry, clean and grease-free. Remove any old sealant residue