Kärcher 1.645-505.0 SP 6 Flat Inox Flat Suction Pump

Kärcher 1.645-505.0 SP 6 Flat Inox Flat Suction Pump

Ideal for up to 14,000 liters of clean water per hour: the powerful SP 6 Flat Inox submersible pump pumps up to 1 mm mop dry. Equipped with Level Sensor and automatic/manual selector switch. Includes pre-filter.

Special characteristics

• The powerful submersible clean water pump from Kärcher pumps up to 14,000 liters of clean to slightly polluted water
• Perfect for swimming pools, drainage shafts and water damage in the home and basement
• For heavier soiling, use of the supplied stainless steel pre-filter is recommended to protect the pump wheel
• The robust stainless steel housing and the ceramic sliding ring seal ensure an extra long service life
• You can extend the warranty to 5 years
• The submersible pump can be set with a variable Level Sensor that starts the pump immediately upon contact with water
• In addition, the SP 6 Flat Inox has folding feet and when these are folded, the submersible pump starts pumping at a water level of 7 millimeters
• Continuous operation can be set with the switch in manual mode
• Depending on the setting of the Level Sensor, both in continuous operation and in manual mode, the pump is pumped to a mop-dry water level of 1 millimeter
• And the Quick Connect connection thread allows quick and easy connection of 1, 1 1/4" and 1 1/2" hoses
• Front face ceramic sliding ring seal
• For an extra long run time
• Level Sensor
• For continuously variable setting of the start and stop point of the pumps
• Quick Connect
• Connection thread for quick and easy connection of 1", 1 1/4" and 1 1/2" hoses
• Foldable feet
• Switching from normal operation with a higher capacity to recording up to 1 mm with a mop-dry result
• Automatic ventilation
• The pump starts working in manual mode from a water level of 7 cm
• Switch automatic/manual
• For switching between automatic and manual mode
• Comfortable carrying handle
• Comfortable handle and can also be used to secure a rope
• Robust and easy to attach stainless steel pre-filter
• Protects the pump from contamination and prevents the pump wheel from clogging

Technical data

• max. power : 550 W
• Water yield max. : 14000 l/h
• Head / pressure max. : 9 / 0.9 m/bar
• max. pumping depth : 7 m
• max. grain size : 5 mm
• Residual height of water : 1 mm
• Flow temperature, max. : 35 °C
• Connection thread : G1 1/2
• Power cable : H07RN8-F / 10 /m
• Voltage : 230 - 240 V
• Frequency : 50 Hz
• Weight without accessories : 5.7 kg

Included

• Comfortable carrying handle
• Removable stainless steel pre-filter
• Quick Connect for quick and easy connection of hoses
• Switching between manual/automatic operation, Switch on pump
• Switch to flat extraction
• Level Sensor: Water level continuously adjustable