Kärcher 6.997-359.0 Connector 3/4" and 1" Drain hose with check valve

Kärcher 6.997-359.0 Connector 3/4" and 1" Drain hose with check valve

Features

• Pump Adaptor for vacuum tight connection of suction hoses to garden pumps and high pressure pumps for Home & Garden use
• The adaptor is ideal for pumps with a 1" (33.3 mm) connection thread and 3/4" or 1" hoses
• Including connecting nut, hose clamp, washer and non-return valve
• The check valve can be used in submersible pumps and hydrophore pumps to prevent the water from flowing back into the pump
• Otherwise a washer is used instead of a non-return valve

Properties

• Connection piece
• For vacuum-resistant connection of the hoses to the pump
• Rotating wire
• To connect the pump connector to the pump, especially if the tube is already connected to the pump connector
• For 3/4" and 1" hoses
• The corresponding connector can be used depending on the size of the hose
• Includes flat seal
• Sealing of the connection to the pump, so that no water can escape
• Includes check valve
• Prevents backflow of water that has already been pumped
• This is particularly recommended when using submersible pumps
• Includes hose clamp
• For connecting the tube to the pump connection

Specifications

• Dimensions : For 3/4" and 1" hoses
• Dimensions (l x w x h) : 41 x 65 x 41 mm