Levelfix 545709 Metofix VM128 Moisture Meter

Levelfix Metofix VM128 Moisture Meter

Features

• Moisture build-up in walls or floors? Use the METOFIX VM 128 to measure how dry or wet the walls or floors are.
• This makes it easy to detect moisture caused, for example, by poor cavity wall insulation or condensation following airtight construction.
• Of course, moisture measurement is also useful for determining the moisture value of finishing materials (plaster, concrete, anhydrite) after processing.
• The VM128 is a non-destructive moisture meter for hard materials and materials that should not be damaged, such as concrete, cement, wood and other building materials.

Suitable for

• Identifying moisture spots in floors, walls and ceilings;
• Determine whether a surface is suitable to be covered or painted;
• measure the moisture content of finishing materials after processing;

As with all measuring instruments, a correct measurement is important for correct values. A single measurement still says nothing. By taking several measurements, you can compare them. Using the theory "a surface can be uniformly dry, but not uniformly wet," you can determine if a wall or floor is dry. Are all the values the same? Then the surface is dry. When the VM128 displays different values, you know which areas are still damp or where there is a moisture problem. Note that the meter measures 4 cm deep and the measurements can therefore be influenced by, for example, underlying (floor) heating, copper pipes, wickerwork or old tiling.

Technical data

• Display: LCD
• Measuring range: 5~40 mm
• Measuring principle: Digital sensor, dielectric
• Measurement accuracy: ±0.1%
• Power supply: 9v battery

Scope of delivery

• Bag
• Batteries