Loctite 232345 MR 3020 Gasket improver 400 ml

Loctite MR 3020 Gasket improver 400 ml

Special Features

• LOCTITE® MR 3020 is a red, viscous, liquid synthetic resin adhesive/sealant in a spray can, specially designed as an adhesive/sealant. Here are some key features:
• Quick drying: It dries quickly after it is applied, making it suitable for situations where quick installation is required.
• Sticky film formation: It forms a very sticky film when it dries, which helps hold conventional pre-cut gaskets in place during assembly. This sticky film also improves sealing performance during use.
• Applications: It is mainly used to hold pre-cut gaskets in place during assembly and to improve sealing performance. For example, this can be useful when assembling parts where gaskets are needed to prevent leakage.
• Ease of use: Because it comes in a spray can, it is easy to apply to desired surfaces.
• Overall, LOCTITE® MR 3020 provides a convenient solution for improving sealing performance and holding gaskets in place during assembly.

Strengths

• Very easy to apply from a spray can
• Can be used for rubber, cork, paper, metal, asbestos and similar gaskets
• Dries to a very sticky, elastomeric film
• Stays sticky indefinitely
• Holds gaskets in place during assembly, even with vertical orientation
• Significantly improves the performance of gaskets
• Resistant to gasoline, diesel, water, grease and oil
• Contains no ozone-depleting solvents
• Very economical - one canister is sufficient for several applications

Hazard statements

• H222 : Highly flammable aerosol.
• H229 : Pressurized container: may burst when heated.
• H319 : Causes severe eye irritation.
• H336 : May cause drowsiness or dizziness.
• H412 : Harmful to aquatic organisms with long lasting effects.

Safety recommendations

• P102 : Keep out of the reach of children.
• P101 : When seeking medical advice, keep container or label available.
• P102 : Keep out of the reach of children.
• P501 : Waste and residues should be disposed of in accordance with the relevant regulations of the local authorities.
• P210 : Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
• P211 : Do not spray into an open flame or onto other sources of ignition.
• P251 : Do not pierce or burn even after use.
• P261 : Avoid inhalation of dust/fume/gas/mist/vapor/spray.
• P273 : Avoid discharge into the environment.
• P280 : Wear protective gloves/protective clothing/eye protection/face protection.
• P337 + P313 : In case of persistent eye irritation: consult a doctor.
• P410 + P412 : Protect from sunlight and do not expose to temperatures exceeding 50°C/122F.

Technical data

• Physical formLiquid
• ColorRed
• Contents 400 ml