Loctite 488467 510 Liquid gasket 25 ml

Loctite 510 Liquid gasket 25 ml

Special Features

• LOCTITE® 510 is an anaerobic sealant specifically designed to withstand high temperatures and chemicals. It cures in the absence of air between closely fitting metal surfaces, providing a strong and durable seal.
• This product is commonly used for sealing rigid flange edges on transmissions and engine housings, providing direct sealing at low pressure. It also increases the joining capacity of assembled flanges, improving seal reliability.
• LOCTITE® 510 is ideal for use on rigid flanges where high temperatures and chemical resistance are required. It provides effective and immediate sealing, making it a reliable choice for a variety of industrial applications.

Strengths

• For metal flanges
• Flange seal resistant to high temperatures
• Suitable for irregular flange surfaces and scratches up to 0.25 mm
• Increases the tightening capacity of mounted flanges
• P1 NSF Reg. No.: 123007

Hazard statements

• H317 : May cause an allergic skin reaction.
• H319 : Causes severe eye irritation.
• H335 : May cause respiratory tract irritation.

Safety recommendations

• P101 : When seeking medical advice, keep container or label available.
• P102 : Keep out of the reach of children.
• P501 : Waste and residues should be disposed of in accordance with the relevant regulations of the local authorities. national regulations.
• P261 : Avoid inhalation of dust/fume/gas/mist/vapor/spray.
• P280 : Wear protective gloves/protective clothing/eye protection/face protection.
• P333 + P313 : In case of skin irritation or rash: consult a physician.and.
• P337 + P313 : In case of persistent eye irritation: consult a doctor.

Technical data

• Recommended for use withMetal Steel, Metal: Aluminum
• Application methodDosing system, Manual, Screen printing
• Number of components1-component
• Key featuresChemical resistant, Strength: Medium strength, Thixotropic, For machined, rigid flanges
• Chemical baseDimethacrylate ester
• Fixation time, Steel25.0 min.
• Physical formGel
• Hole filling, Unprimed0.25 mm
• Operating temperature-65.0 - 400.0 °F (-55.0 - 200.0 °C )
• ColorPink
• Storage temperature8.0 - 21.0 °C
• ApplicationsSealing, Sealing of rigid flanges, For close fitting parts, For high temperature applications
• Curing typeAnaerobic curing
• Viscosity, 20 RPM90000.0 mPa.s(cP)