Makita Accessories D-53556 Milling set 8mm 12-piece

Makita D-53556 Milling set 8mm 12-piece

Special characteristics

• 12-piece cutter set consisting of: 3x groove cutters, 1x copy cutter, 1x dovetail cutter, 1x V-groove cutter, 1x hollow profile cutter, 2x edge cutter with bearing, 1x hollow profile cutter with ball bearing, 1x chamfer cutter, 1x frame profile cutter.
• The cutters are delivered in a wooden box with a closure. The box inlay provides both good protection and clear storage of your cutters.
• The cutters are made of high quality carbide. This gives the cutters a long service life. The cutters have 2 cutting surfaces per cutter. As a result, the cutters deliver a very tight and accurate finish.
• In addition, the cutters are ground at an angle, which makes them suitable for precise work.

Included

• 1x copy milling cutter with bearing with a diameter of 12.7 millimeters and a length of 13 millimeters.
• 1x grooving cutter with a diameter of 6 millimeters with a length of 16 millimeters.
• 1x groove cutter with a diameter of 12 millimeters with a length of 19 millimeters.
• 1x groove cutter with a diameter of 16 millimeters with a length of 20 millimeters.
• 1x edge cutter with a diameter of 25.4 millimeters and a radius of 6.35 millimeters.
• 1x edge cutter with a diameter of 31.8 millimeters and a radius of 9.5 millimeters.
• 1x frame profile cutter with a diameter of 28.6 mm and a radius of 4.
• 1x V-groove cutter with a diameter of 12.7 millimeters with a length of 12 millimeters.
• 1x Hollow profile cutter with a diameter of 12.7 millimeters and a radius of 6.35 millimeters.
• 1x Dovetail cutter with a diameter of 12.7 millimeters and a length of 13 millimeters.
• 1x Hollow profile cutter with a diameter of 31.8 millimeters with a radius of 9.5 millimeters.
• 1x chamfer cutter with a diameter of 31.8 millimeters and a radius 13.5.

The cutters have an 8 millimeter shank. As a result, the cutters fit on any brand of (top) cutter with an 8 millimeter intake.