Metal Works 829300205 TIG200PAC Inverter Welding Machine

Metal Works 829300205 TIG200PAC Inverter Welding Machine

AC/DC TIG lasinverter 200A, last in TIG, PULSE TIG, en MMA (electrode)

Benefits

• Very high duty cycle: 40 ij 200A
• For industrial welding and production work
• Full digital control on the machine
• HF TIG torch 4 meter

Dit lastoestel is ontwikkeld voor Leave TIG in AC/DC. De lasser heeft dankzij het overzichtelijke display altijd de volledige controle over alle lasparameters.

Leave TIG

• DC TIG: Steel, stainless steel, copper, brass, titanium
• AC TIG: Aluminium, brons, magnesium
• Clean weld seam due to stable, controlled arc
• PULSE welding: controlled heat input
• AC frequency tto 250Herz for a deep penetration of the electric arc
• Clear digital display with control of: AC/DC, welding current, peak current, down slope, pre- and post-flow, pulse frequency, pulse balance, pulse duty, AC clean width
• Memory function for 5 sets of parameters
• Memory is retained in case of power failure
• 2-stroke/4-stroke
• HF/Scratch TIG ignition
• Compatible with foot pedal for power control

Electrode welding is possible with this welding station with an optional electrode holder

• DX50 connection points on the machine equipped with electrodes up to 6 mm in diameter (rutile, basic, ...)
• Hot Start for optimum start-up without splashing
• Adjustable Arc Force

The device is equipped with various safety devices

• Voltage differences on the mains or in extension cable up to - 15%
• Corrosion- and impact-resistant housing
• CE in EMC conform
• IP21S suitable for use on construction sites
• Protected against overloads and over- or undervoltage on the mains

Specifications

• Frequency Hz 50/60
• Spanning V 230 -10%
• Maximum duty cycle A 200 @40%
• Control range A 5~200
• Absorbed current 60%/max A 200
• No-load voltage V 56
• Insulation class F
• Beschermingsklasse IP 21S
• Electrode capacities mm 6
• Suitable for steel Yes
• Suitable for stainless steel Yes
• Suitable for alu Yes
• Rutile electrodes Yes
• Basic electrodes Yes
• Lastype TIG AC/DC
• Weight kg 12,00
• Dimensions (l x w x h) mm 526x162x277

Includes

• HF TIG torch 4 m
• Ground cable 16mm² 3 m length and ground clamp
• Gas release valve with double manometer
• Quick coupling for fastening and releasing of the gas hose