Metal Works 722316564 WD70 Oil Direct Fired Heater 20kW

MW-Tools WD70 Oil Direct Fired Heater 20kW

Special characteristics

• Suitable for heating rooms from 228 to 1160m³, depending on the insulation and ventilation of the room.
• The better the insulation value of the building elements (lower K-value), the larger the space you can heat.
• Minimum heatable volume of 228m³, with a K-value of 2.5: in case the building is not insulated, with single glazing, full stone walls, roof with old corrugated iron, or for rooms where gates are regularly open.
• Maximum heatable volume of 1160m³, with a K-value of 0.5: in case the building is well insulated according to recent building standards
• Built-in thermostat with temperature display on LCD display
• Fuel: diesel and white petroleum
• Stainless steel combustion chamber
• Built-in steel tank with fuel gauge
• IPX4 plenswaterdicht

Advantages

• Direct combustion
• Qualitative Danfoss nozzle ensures optimal atomization and total combustion
• Can be used both indoors and outdoors for heating, drying, defrosting and keeping ventilated areas frost-free
• Safeties: flame monitoring, power cut and fuel sensor ensure optimum safety in all conditions

Technical data

• Heat emitted kW/h 20
• Heat type Direct combustion
• Energy source Petroleum / Diesel
• Thermostat Owns the property
• Fuel tank capacity l 19
• Fuel consumption l/h 1.6
• Total consumption W 230
• Heated space m³ 228-1160
• Air displacement m³/h 550
• Voltage V 230
• Protection class IP IPX4
• Suitable for outdoor use Yes
• Frequency Hz 50
• Weight kg 14.00
• Dimensions (lxwxh) mm 750x315x415

Scope of supply

• In Cardboard