Milwaukee Accessories 49560082 HOLE DOZER™ hole saw 38 mm

Milwaukee 49560082 HOLE DOZER™ hole saw 38 mm

Description

• Tooth material - Matrix II premium high-speed steel has been used for the teeth of the hole saw
• Matrix II steel contains 8% cobalt which allows the teeth to retain their original hardness
• Even at high temperatures encountered in metal cutting applications, for example. -Bi-metal construction - quality steel teeth are laser-welded to a high-alloy steel body
• The teeth are then vacuum-hardened to 65 HRC at a temperature of 600°C to give them maximum durability and service life. - Thanks to the high wear resistance of the Matrix II steel, the hole saws are ideal for cutting difficult and hard materials such as stainless steel, as well as softer materials such as wood.
• Body hole saw - The 1.27 mm thick steel body of the hole saw is rigid enough to keep its shape, but of course also has enough built-in elasticity.
• Right-handed cutting angle for maximum productivity.
• Tooth design - A tooth design with 3.5 teeth per inch and a positive tooth angle of 10° offers the following advantages: - Faster and more aggressive cut. - Improved heat dissipation during cutting ensures the teeth stay sharp longer. - Deeper curved chip spaces provide more efficient chip removal, preventing clogging and heat build-up. - Specially shaped tooth angle has less tendency to snag on thinner materials. - Teeth are set alternately/sided to minimize binding and friction. - Requires less feed pressure - This is achieved through the combination of aggressive tooth geometry and good chip removal, requiring less force during drilling.
• Bottom plate hole saw - The bottom plate of the hole saw is made of thick steel
• This ensures shape retention even after intensive use. - Perfectly produced round bottom plates, important for large diameter hole saws.
• Diagonal slots help remove the drilled material.
• Applications - Manufacturing techniques carried out to the highest quality standards ensure high circularity accuracy
• Therefore, these holesaws are suitable for both hand and column drills (manual feed only).
• This high-quality series of hole saws is the perfect solution for cutting all types of materials: - Steel up to 1000 N/mm² strength - Stainless steel and acid-resistant steel - Non-ferrous metals - Cast iron - Aluminum - Wood - Medium-density fiberboard (MDF) - Gypsum board - Sandwich materials - PVC.

Technical data

• ⌀ (inch): 1 ½
• ⌀ (mm): 38
• Max cutting depth (mm): 41