Metal Works 724562243 DG150EP Diesel Generator 1x230V 12.0KW / 3x400V 15.0KW with connection for external fuel tank

MW-Tools DG150EP Diesel Generator 1x230V 12.0KW / 3x400V 15.0KW with connection for external fuel tank

Low-noise diesel generator 15.0 kW at 3x400 V and 12.0 kW at 1x230 V with connection for external fuel tank.

Special characteristics

• High Continuous power of 11.0kW at 230V and 14kw at 3x400V
• Connection for external diesel tanks, so that the generator can continue to run without refilling
• The generator can be used as an emergency generator, providing enough for entire homes and small businesses
• ATS plug, for connection to an ATS and the fuse box, for automatic switching between mains and generator power
• Type 'Equal power' with 2 separate fuses on the main board: a separate fuse for 1x230 V and for 3x400 V.
• This allows you to get the maximum power from the generator in both mono and three-phase voltage 1x230V 63A industrial socket blue, fused at 63A, allows to continuously supply up to 11.0kW power in 230V to an ATS.
• Suitable for heavy 230 V appliances such as construction machines (pumps, saws, construction cranes, etc.), workshop machines (compressors, heaters, etc.), garden tools (lawn mower, water pump, pellet machine, wood splitter, etc.) and household machines and appliances (heat pump, air conditioning, oven and hob, washing and drying machine, ...)
• AVR automatic voltage regulation.
• Built-in diesel tank of 30 liters + external tank connection
• The front panel is equipped with 2 nipples 7.5mm for connecting fuel hoses to an external diesel tank. (hoses and external tank itself are not included)
• The pump in the housing can be switched between the internal or the external tank via a selector button.
• The pump is self-priming.
• Maximum suction length to external tank: 10 meters. The external diesel tank must be on the same level as the generator
• 12.0 kW maximum power at 1 x 230V
• 15.0 kW maximum power at 3 x 400V
• 100W maximum power at 12V
• 2 separate main fuses on the main board: 230 V (63A) and 3x400V (32A) with selector switch.
• Sockets: 3x400V 32A (1x), 230V 63A (1x), 230V 16A (1x) and 12V 8.3A (1x)
• The blue 1x230V 63A industrial socket is fused at 63A, and allows to continuously supply the maximum power of the generator in 230V, 11kw to an ATS.
• Air-cooled diesel engine 20.4 hp
• Electric start
• Electric preheating for easy cold starting of the engine in temperatures below 5°C
• 6-pin ATS input plug, to which an external ATS (Automatic transfer switch) can be connected.
• This ATS manages switching the generator on/off in the event of power cuts to the indoor electrical installation. (The ATS itself is not included)
• Low-noise housing, fully lined with a sound-absorbing foam
• AVR Automatic Voltage Regulation: Provides a stable output voltage of 230V.
• The voltage differences are within +/- 2.5%, making this generator suitable for use with most electronic devices such as construction machines, garden machines, household and kitchen appliances etc.
• Not suitable for very sensitive devices such as computers or sensitive electronics.
• Digital display showing 5 parameters: Voltage (V), Current (A), Frequency (Hz), Power (W) and hour meter
• 100% Copper Wound Alternator
• Connection for external ground pin (pin and cables not included)
• Thermal overload