Optimum 713427003 Optiturn TU2807 Lathe 400 Volt

Optimum 713427003 Optiturn TU2807 Lathe 400 Volt

High precision lathe for the demanding user.

Features

• Induction hardened and precision ground prism bed guides
• Guaranteed spindle nose roundness accuracy better than 0,009 mm
• Digital display of spindle speeds (Vario model only)
• High and precise finish
• Smooth-running feed drive with rounded gears, running in an oil bath
• Selector switch right - left
• Separate emergency stop and start/stop button
• For flush turning, longitudinal turning, cone turning and thread cutting
• Rolled trapezoidal spindle is supported by 2 sintered bearings
• Tapered roller bearings in quality class P5
• Pressure bearings
• Strong ribbed prism bed of cast steel, induction hardened and finely ground
• Chuck guard with microswitch, solid chisel guard and nice splash guard
• Loose head can be shifted - 5 mm for turning cones
• A set of exchangeable wheels provides a wide range for thread cutting
• With a feed shaft for thread cutting or automatic longitudinal turning
• Powerful, maintenance-free motor
• Constructed according to DIN8606
• Other voltages available on request 3x220V/50Hz and 3x440V/60Hz
• Note: 3x220V = power current (driving power). This is not the same as 1x230V mono = alternating current

Specifications

• Spanning V 3x400
• Motor power kW 0,85
• Center height mm 140
• Center distance mm 700
• Turning diameter above bed mm 266
• Turning length in the bed bridge mm 180
• Bed width mm 180 Cup
• Number of speeds 6
• Spindle speed min-1 150-2,000
• Spilkonus MK 4
• Spilboring mm 26
• Wire steps and power supply
• Longitudinal feed mm/O 0.07-0.2
• Thread cutting metric M 0,2-3,5
• Thread cutting inch Gg/1 56-8
• Guide and trolley
• Travel distance chisel slide mm 60
• Traversing distance cross slide mm 160
• Height of chisel holder mm 13,5
• Loosele kop Cone losse kop MK 2
• Heading loose head mm 85
• Weight kg 180,00
• Dimensions (l x w x h) mm 1,370x640x535

Includes

• Chuck with 3 claws 125 mm
• Fixed center point MK2
• Fixed center point MK4
• Meenemer
• Chuck and chisel guard, splash guard and swarf container
• 4-fold chisel holder
• Wisselwielen set
• Control keys
• Afnameprotocol
• Dutch language manual, inscriptions, CE-mark, and CE-declaration according to Machinery Directive 2006/42/CE, Low Voltage Directive 2006/95/CE and EMC Directive 2004/108/CE

Tip:is delivered without stand 713440409, do not forget to order.