ProFit 09281133 Multi Purpose Hole Saw Long 133 mm with integrated adapter

ProFit Multi Purpose Hole Saw Long 133 mm with integrated adapter 09281133

This hole saw with carbide teeth and integrated Click & Drill® adapter is supplied without a centering pin. Application in wood, hardwood, chipboard and MDF and abrasive materials, such as soft stone, drywall, limestone.

Description

• Multi Purpose Long hole saws with carbide teeth and integrated Click&Drill® adapter (0928).
• For deep holes up to 160 mm.
• Application in wood, chipboard, MDF, soft stone, wall tiles (up to scratch hardness 4) and plastics.
• Diameters from 32 to 210 mm.
• The carbide (HM) teeth are regrindable.
• Excluding centering pin.
• Benefits of the Multi Purpose Long hole saws with integrated Click&Drill® adapter:
  Quick change of hole saw.
  Sawing at an extreme angle.
  
• Operating Instructions for the Multi Purpose Long (MPL):
  A. pre-drill with a 10 mm stone or wood drill bit.
  B. snap the centering pin into the MPL hole saw.
  C. Place the centering pin in the pre-drilled hole and begin drilling carefully.
  
• Note!
  Use a drill with sufficient power due to the torque required for the MPL.
  Sizing is highly dependent on use and application.
  Maintain speed as indicated on the speed chart provided.

Technical data

• GLN 8714757999990
• Product Group number 0928
• CBS Number 82075090
• Connection hexagon 10 mm
• Centering pin DDC2LHD
• Diameter 133
• Applicable in material Cellular concrete, Plate material, Wood
• Cutting depth 160
• Application roof penetration, piping, ventilation