Remko 125700 CLK 70 Indirectly Fired Heater 68 kW

Remko CLK 70 Indirectly Fired Heater 68 kW 125700

Mobiele en snelle warmte

Features

• The CLK model heaters provide the necessary heat at the desired locations during sudden cold spells or work that cannot be delayed. This creates independence, because building on schedule requires that work can also be carried out during the cold season. This is when structures, materials and workplaces must be protected.
• The mobile devices need only be in place during the desired period of use to provide instant heat when needed, with no warm-up time.
  To make sure everything grows and flourishes:
• No other heating system can be used as optimally in glass and heating oil greenhouses as our heaters. This applies to the exact determination of the most suitable device with regard to the size of the greenhouse as well as to the heat output and the desired operating period. When needed, the devices provide heat without the warm-up time of traditional hot water heating systems and other heating systems. This means lower energy consumption and significant cost savings.
• Numerous options for hot air distribution:
  The unit series CLK can be called a real powerhouse without exaggeration. They are the most powerful mobile heaters with specially optimized crescent-shaped fans. Powerful, with high discharge pressure for connection of hot air hoses

Sterke Punten

• Fuel oil burner with fan, brand manufacturer of our choice, replaceable within just a few minutes
• Extremely low flue gas losses, therefore high combustion efficiency and optimum economy
• Plug connection for control with room thermostat
• Electric fuel oil preheating
• Automatic rotation direction control of fan (CLK 170-RV)
• Forklift take-up profiles (optional)
• Closed burner lining
• Geschikt voor het stoken met biodiesel B7/B10 en HVO biobrandstof
• Standard single-strand design

Specifications

• Rated heat load max (OUTPUT) 68 kW
• Brandstof Stookolie EL/diesel
• Fuel consumption, fuel oil Max (OUTPUT) 6.6 l/h
• Oil nozzle Danfoss (OUTPUT) 1.35 / 60 °S
• Connection/pump pressure (OUTPUT) 12 bar 136 kg/h 240 kg/h
• Spanningsvoorziening 230/1~/50
• Power consumption max (OUTPUT) 0.86 kW
• Rated current draw max (OUTPUT) 4.0 A
• Air outlet Ø (OUTPUT) 400 mm
• Dimensions h/b/d 1120/730/1610 mm
• Gewicht 61 kg