Rems 580091 R22 580091 Battery Curvo 22 Volt 15-18-22 mm excl. battery and charger

Rems 580091 R22 580091 Battery Curvo 22 Volt 15-18-22 mm excl. battery and charger

REMS Akku-Curvo 22 V - bending of pipes without ribs. Universal for many pipe types. Ready for immediate use without adjustment. Quick-change and creep motion with quick stop for accurate bending. Quick change of bending segments and sliding blocks. Li-ion battery 21,6 V, 5,0 Ah, for approx. 90 bends of the stainless steel pipes of pressfitting systems with one battery charge.

Features

• Universal application: in sanitary, heating, air conditioning, refrigeration technology and hydraulics. Excellent for pipes of press-fit systems, for hard and semi-hard copper pipes, as well as for thin-walled copper heating pipes according to EN 1057
• System advantage: Only one type of bending segments and sliding blocks for REMS Akku-Curvo 22 V, REMS Curvo, REMS Curvo 50 and REMS Sinus. Therefore simple, inexpensive stockholding. No interchanges possible
• Cost advantage: The pipe bender pays for itself after only a few bends, due to the savings in tooling. No costs for fittings, stock, purchase. Savings in soldering locations, press connections and working time. Increased safety due to fewer pipe connections
• Design: Compact, handy electric tool with power transmission enclosed during bending. Super light, only 8.5 kg driving machine. Can be used everywhere immediately. No setting work. Simple, effortless, fast work, e.g. 90° bend, Ø 22 mm only 6 sec. Fast and creep-free bending for dimensional accuracy. Cat back bends, double bends, level bends, reverse bends possible. Height-adjustable machine support as an accessory
• Bending segments and sliding blocks: Form and pressure stable, made of high quality, very good gliding, glass fibre reinforced polyamide. The optimum matching of bending segment and sliding part guarantees material-oriented bending without crack or ripple formation. Scale for bends from 0 to 180° on each bending segment and marking on each sliding segment for accurate dimensional bending. Quick change of bending segments and sliding blocks. Bending segments and sliding blocks for different pipe diameters, materials and bending radii
• Drive: Robust, maintenance-free drive gear. Start-up protection in both directions of rotation through safety clutch. High performance battery motor 21.6 V, with large power reserve, 500 W output. Clockwise and anti-clockwise rotation. Stepless electronic safety switch for rapid traverse and crawl, with rapid stop. Machine status control with overload protection of the drive machine against excessive current, with overheating protection by motor temperature monitoring (NTC), with electronic charge status control and indication of the charge status by means of a 2-colour, green-red LED
• Battery or mains-powered Li-Ion 22 V Technology. Heavy-duty Li-Ion 21.6 V battery with 5.0 or 9.0 Ah capacity for long runtime. Light and powerful. Battery Li-Ion 21,6 V, 5,0 Ah, for approx. 90 bends, 9,0 Ah for approx. 160 bends of the stainless steel tubes of pressfitting systems with one battery charge. Stepwise indication of the charge status with coloured LEDs. Operating temperature range from -10 to 60 °C. No memory effect for maximum battery capacity. Li-Ion quick charger 230 V, 50 - 60 Hz, 90 W. Li-Ion quick charger 230 V, 50 - 60 Hz, 300 W, for shorter charging times, as accessory. Power source Li-ion 230 V/21.6 V, 70 A, for mains operation 230 V instead of Li-ion 21.6 V battery, as accessory

Specifications

• Hard, semi-hard, soft copper pipes, also thin-walled Ø 10 - 28 mm, Ø ? - 1?"
• Soft sheathed copper tubes, also thin-walled Ø 10 - 18 mm
• Thick-walled copper tubes K65 for refrigeration and air conditioning EN 12735-1 Ø ? - 1?"
• Tubes of pressfitting systems of: Stainless steel Ø 12 - 28 mm C-steel, also sheathed Ø 12 - 28 mm
• Soft precision steel tubes Ø 10 - 28 mm
• Stalen buizen EN 10255 Ø ¼ -