Rhodius 304014 RH403S Trench saw LD404 All in One 150 mm disc

Rhodius 304014 RH403S Trench saw LD404 All in One 150 mm disc

With the RH403S, nuts and channels, e.g. in masonry, can be easily and quickly routed. The electronics of the machine include a soft-starter for a smooth start-up, an automatic shut-off in case of overheating and overload and a visual signal in case of overload. In addition, the machine is characterised by its slim design. Thanks to the ALL IN ONE system with crossed segments, extremely precise wall chases are created. The small distance from the protective guard enables precise routing with diamond discs at edges of up to 18 mm. By adjusting the guard, you can steplessly set the slot depth from 12 to 45 mm with very little effort and without using tools. Because of the split safety spindle with exactly fitting spacer rings, users can change the tool without any effort, thus reducing conversion times to a minimum. The ALL IN ONE can only be used with the split spindle. Separately, the cutter is equipped with a flexible safety cable. The 35 mm diameter connector is designed for direct connection of an industrial vacuum cleaner of dust class M. The ergonomic handle with switch and on/off lock, as well as the push-fit cut, ensure comfortable and precise operation. Cutting out after sawing is no longer necessary!

Features RH403S

• Perfectly matched to ALL IN ONE
• Virtually dust-free penetration and routing of trenches thanks to hinged hood
• Powerful 2,300 W motor mills powerfully through the material
• Electronics - softstarter for gradual startup, automatic shutdown in case of overheating and overload, optical signal in case of overload by means of LED indicator
• Hose holder with lock prevents the hose from slipping off during routing
• Tool-free adjustment of milling depth from 12 - 45 mm
• Spindle lock for easy tool changes
• Slim design
• Low distance guard diamond cutting discs for precise edge work up to 18 mm
• Closed hood optimal flow conditions
• Push cut comfortable handling
• Connection point for suction Ø 35 mm for direct connection of an industrial vacuum cleaner of dust class M
• Spacer rings for the use of single discs and expansion tools available in an expansion kit

Specifications of RH403

• Hole 22.2mm
• Rotation speed 50m/s
• Power 2300W
• Diamond wheel diameter 150mm
• Voltage 230V
• Weight 6.5 kg

Manual

• 1 x Diamantzaagblad 150 mm All in One LD404 All mIn One 30 mm
• Suitcase