Rubi 4974 0 FORAceramics Diamond drill bit 65 mm wet

Rubi 04974 FORAceramics Diamond drill bit 65 mm wet

• The FORAGRES range of diamond drills are recommended for drilling all types of tiles and other wall or floor materials such as marble and granite. Available in various diameters from 20 to 120 mm
• They are perfect for making holes in the tile
• The FORAGRES series of diamond drills are designed to get the best results when performing the necessary drilling for water pipes, water drainage, electrical connections, etc
• The diamond edge of FORAGRES drill bits is attached to the metal drill bit by a reinforced weld
• MINIGRES diamond drill bits must always be cooled with water and can only be connected to a drilling machine
• The use of the MULTIDRILL guide (ref. 50944) is recommended up to a diameter of 83 mm
• For drilling holes larger than 84 mm in diameter, the FORAGRES guide is recommended (ref. 50900)
• The average lifetime of FORAGRES diamond drill bits is 60 holes and always depends on the type of material, thickness, cooling and application
• The drilling depth of FORAGRES diamond drill bits is 30 mm (33 mm for diameters of 55 and 75 mm)
• The MINIGRES diamond drill bits do not have a disposal opening, always make sure the drill bit is clean and free of waste
• The maximum speed for using FORAGRES diamond drills is 900 rpm, except for diameters of 100 and 120 mm, where the maximum speed is 450 rpm
• For a better finish and longer life of the drill bit, it is important to maintain the proper rotation speed and apply moderate pressure while drilling
• Diameter 65 mm