Rubi 31966 TPI-200 Super Pro 200 mm x 25.4 mm Diamond saw disc Porcelain, Ceramic, Turbo mitre

Rubi 31966 TPI-200 Super Pro 200 mm x 25.4 mm Diamond saw disc Porcelain, Ceramic, Turbo mitre

J-SLOT - CPX saw blade for porcelain tiles

Features

• The range of TPI diamond blades has been specifically designed for mitre cuts
• The main features of the TPI are its great stability and high cutting speed. Thanks to its thickness of 2.5 mm, the TPI can perform mitre cuts without the use of a special placer, but for maximum precision this is always a welcome addition
• For the TPI saw blades, we chose the TURBO variant, taking into account that the original edge and top edge must be respected. For the ceramic tile, this leaves us with a small margin of 1 to 2 mm. This way, there is no damage to the glaze
• The connection between the diamond band and the steel core is made by laser welding technology for maximum resistance
• For the best performance of the TPI diamond discs, it is very important to use an abrasive block periodically
• When using a new saw blade, or after a long period of storage, always use it to sharpen the blade
• Also, if you notice that the cutting speed has slowed down, you can remedy this by cutting a sharpening block. The proper way to use these blocks is to cut small slices of the block
• It is recommended to use the TPI diamond blades in saw tables with a standard sufficient protection system for the use of non continuous blades

Specifications

• Outer diameter - 200 mm
• Inner diameter - 25,4 mm
• Segment height - 7.5 mm
• Segment thickness - 2,5 mm