Runpotec 10203 Twisted Tension Spring Runpo 5 with 2x Runpogleiter in Box with Length Gauge 30m

Runpotec 10203 Twisted Tension Spring Runpo 5 with 2x Runpogleiter in Box with Length Gauge 30m

Twisted Tension Spring Runpo 5 with 2x Runpogleiter in Box with Length Gauge. The RP5 - RUNPOTEC Polyester Ø 5.5 mm is a cable pulling spring including digital meter counter (for determining the length of pipes/cables or for making cable lists). The triple-twisted special plastic tension spring Ø 5.5mm has an even better pushing effect than the fiberglass rod Ø 3mm and the frictional resistance is only half as great due to the Runpogleiter. The patented RG7 anti-torsion guide head Ø 5.5mm (pressed on at the beginning and end of the band) allows to overcome the smallest radii (bending radius 15 mm). The RP5 - RUNPOTEC Ø 5,5mm is stored in a robust storage box suitable for construction sites with an ergonomic carrying handle. It is equipped with the new push-back protection, which prevents the cable retraction strap from accidentally slipping back. The measurement unit of the meter counter can be changed from Metric (m) to Imperial (ft). The total breaking load of as much as 270 kg covers the entire retraction system. Labor and time-consuming repair work are no longer necessary because this cable pull-in system is virtually breakage-free. The RP5 is available in 20-meter and 30-meter lengths. The RP5 replacement tape 40 m cannot be stored in the box.

Special features.

• 50% less friction resistance
• Maximum tensile load 270 kg
• Virtually unbreakable, even in the tightest bends
• Optimal area of application: for pipes with a diameter of 16 mm - 40 mm

Technical data.

• Diameter: 5.5 mm
• Length: 30 m
• Breaking load: 270 kg
• Bend radius: 15mm
• Tube diameter: 16-40mm
• Material: Plastic
• Connection Spring: RTG6
• With Reel: Yes
• Twisted: Yes
• With Runpogleiter: Yes