Soudal 123777 Soudafoam Comfort PU foam 600ml

Soudal 123777 Soudafoam Comfort PU-schuim 600ml

Features

• Easy to operate with 1 hand
• Perfect control over the sprayability of the foam
• Canister reuse possible up to 6 weeks after opening
• Great filling power
• Hoge isolatiewaarde, thermisch en akoestisch

Toepassingen

• Installation and insulation of door and window frames.
• Insulating pipes and filling their passages
• Filling joints and installing electrical cables
• Bonding and insulating panels, corrugated roof tiles, etc.

Specifications

• Base: polyurethane
• Consistency: Stable foam, thixotropic
• Uithardingssysteem: Polymerisatie door luchtvochtigheid
• Skin formation (FEICA TM 1014): 7 min
• Cutting Time (FEICA TM 1005): 25 min
• Density: approx. 25 kg/m³
• Sound insulation (EN ISO 717-1): 58 dB
• Insulation factor (DIN52612): 37 mW/m.K
• Box Yield (FEICA TM 1003): 600 ml gives approx. 23 l of foam
• Joint Yield (FEICA TM 1002): 600 ml gives approx. 20 m yield
• Shrinkage after curing (FEICA TM 1004): < 3 %
• Expansion after curing (FEICA TM 1004): < 1 %
• Expansion during curing (FEICA TM 1010): Approx. 117 %
• Fire reaction class (EN 13501-1): No fire class (F)
• Compressive strength (FEICA TM 1011): Approx. 38 kPa
• Shear strength (FEICA TM 1012): Approx. 54 kPa
• Temperature resistance: -40 °C to +90 °C (cured) | 120 °C (Max 1 hour)

Gebruiksaanwijzingen

• Shake canister vigorously for a minimum of 30 seconds. Open the valve and fold the canister horizontally. Invert canister and fill the spaces only partially (±1/3). Shake regularly during use. If working in several layers, moisten between layers. After use, immediately clean the tube with Soudal FOAMCLEANER. Remove spilled uncured product with Soudal FOAMCLEANER. Cured foam can only be removed mechanically or with Soudal PU-remover. Application temperature: + 5 °C - + 30 °C. Slightly moistening the substrate accelerates curing and gives an even better cell structure. Store upright preferably.

Veiligheidsaanbevelingen

Observe usual work hygiene. Wear gloves and safety glasses. Remove cured foam mechanically, never burn away. Refer to packaging and safety data sheet for further information. When atomizing (e.g. with a
compressor) additional safety measures are always required. Ventilate adequately in enclosed spaces.