Soudal 127320 Soudafoam Flex PU foam 750ml

Soudal 127320 Soudafoam Flex PU foam 750ml

Features

• High dimensional stability (no shrinkage or post-expansion)
• Groot vullend vermogen
• Excellent adhesion to all materials(except PE, PP and PTFE)
• Hoge isolatiewaarde, thermisch en akoestisch
• Excellent mounting characteristics
• Zeer nauwkeurig doseerbaar
• Low expansion
• Elastic and compressible
• Freon-free (harmless to ozone layer and greenhouse effect)
• Fast curing
• Not UV resistant

Toepassingen

• All foam applications in static and non-static joints
• Assembly of windows and doors
• Filling of hollow spaces
• Sealing all openings in roof structures
• Application of a soundproofing layer
• Optimizing insulation in refrigeration

Specifications

• Basis: Polyurethaan
• Consistentie: Stabiel schuim, thixotroop
• Uithardingssysteem: Polymerisatie door luchtvochtigheid
• Skin formation (EN 17333-3): 7 min
• Cutting Time (EN 17333-3): 40 min
• Dichtheid: Ca. 25 kg/m³
• Geluidsisolatie (EN ISO 717-1): 58 dB
• Thermal conductivity (?) (EN 12667): 0.035 W/m.K
• Box Yield (EN 17333-1): 750 ml gives approx. 30 l of foam
• Joint Yield (EN 17333-1): 750 ml gives approx. 21 m yield
• Shrinkage after curing (EN 17333-2): < 5 %.
• Expansion after curing (EN 17333-2): < 5 %.
• Expansion during curing (EN 17333-2): Approx. 75%
• Percentage of closed cells (ISO4590): Approx. 3%
• Fire class: B3
• Permanent deformation at pressure (ISO 1856): 50 ompression 22h after 1 day recovery: Approx. 6 %
• Compressive strength (EN 17333-4): Approx. 15 kPa
• Shear strength (EN 17333-4): Approx. 25 kPa
• Tensile strength (EN 17333-4): Approx. 42 kPa
• Elongation at Fmax (EN 17333-4): Approx. 25.1 %
• Water absorption (EN 1609): Approx. 0.28 kg/m²
• Temperatuurbestendigheid: -40 °C tot +90 °C (uitgehard) | 120 °C (max 1 uur)

Gebruiksaanwijzingen

• Shake the canister vigorously for 20 seconds. Screw the canister onto the gun. Moisten the surface free of grease and dust. For non-conventional substrates, it is recommended to perform an adhesion test on the substrate first. Fill the joint or cavity before 65 aar the foam expands further during curing. Shake regularly during use. If working in several layers, moisten between layers. Uncured foam can be removed with cleaner or acetone. Before using the cleaner, test that surfaces are not affected by it. Especially plastics and lacquer or paint layers can be sensitive to this. Cured foam can only be removed mechanically or with Soudal PU Remover. Bus temperature: +5 °C - 30 °C Ambient temperature: -10 °C - 35 °C Substrate temperature: -10 °C - 35 °C Safety recommendationsPlease observe standard work hygiene. Wear gloves and safety glasses. Remove cured foam mechanically, never burn away. Refer to packaging and safety data sheet for further information. Additional safety measures are always required when spraying (e.g. with a compressor). Ventilate sufficiently in closed rooms.

Veiligheidsaanbevelingen

Observe usual work hygiene. Wear gloves and safety glasses. Cured foam mechanical
remove, never burn away. Refer to the packaging and safety data she