Toolnation INV.IN300.2D.DUBB Milling template for concealed hinge Invisacta IN300 2 pcs. double

Toolnation INV.IN300.2D.DUBB Milling template for concealed hinge Invisacta IN300 2 pcs. double

Features

• A milling template for the concealed hinge Invisacta IN300 2-part double with which you can easily milling the Invisacta IN300 concealed hinge on both the door and the frame
• The planks of this hinge milling jig should be mounted on the usual aluminium profile (standard length 2120 mm). This profile is not included
• This aluminium strip is also the stop against the door. Because of the 2mm steel lip at the top of the template, it is easy to take over the measurements from door to frame
• On the door, the aluminium profile serves as a stop. In the frame you place the template with the planks in the groove
• The concealed hinge moulds are made as standard for a door thickness of 40 mm, depending on the type of hinge you have some margin

Specifications

• Type IN300 Dimensions (W x H) 30 mm x 120 mm
• Rear door thickness 5.5 mm / frame thickness 7 mm
• Ring 24 mm
• Chisel 18 mm

Includes

• 2 x milling board
• Without aluminium profile