Ulmia 270-600 Span saw model C 600 mm

Ulmia 270-600 Span saw model C 600 mm

Large bumping saw teeth for coarser cuts. Ideal for and trimming of sawn wood.

Special Features

• Saw arm, made of the best steamed red beech wood, the handle is oval, the seat of the saw blade is left at the seat of the saw blade in full thickness. All surfaces finely sanded, all edges broken.
• Saw bridge, made of the best lime wood, oval shaped, light, elastic and shock absorbing,
  With glued-in armrest to stiffen the saw frame.
• Clamping wire, made of 2.2 mm thick twisted wire, galvanized, stainless.
• Threaded bolt, made of steel with thread for steel wing nut for tensioning.
• Saw blade, from high-quality Swedish steel, ready to use, i.e. set and sharpened, with
  different types of teeth, partially point-hardened, so no re-sharpening.
• Threaded, made of steel, strong design, with cover plate for saw blade holder.
• Saw horn (handle), made of best steamed red beech wood, conveniently shape turned.
• Armrest made of strong hornbeam wood to reinforce the saw frame and hold the iron spring.
• Spring, made of steel, half of which is embedded in the saw arm and the other half in the saw cross to
  and the saw blade.
• Wood surfaces, all surfaces finely sanded, with highly abrasion-resistant natural varnish

Technical data

• Ulmia clamp saw (hand saw) according to DIN 7245, form C.
• Length of saw blade 600 mm
• Tooth width 5.0 mm
• Type of teeth: butt teeth
• Width of saw blade 40 mm