Virutex 9200400 FR292R Reclining Milling machine

Virutex 9200400 FR292R Reclining Milling machine

The only cutter capable of cutting the edges of panels, straight or at an angle, without having to change the cutter.

Features FR292FR

• Its wide base provides good guidance and allows you to mill easily
• It gives you a whole range of additional milling possibilities, thanks to the unique tilting and adjustment system
• Features a powerful 750 W motor with electronic speed control and constant torque control for constant motor speed while working. External dust connection
• Easier and more accurate routing with the special 90° cutter:
• The body of the machine can be tilted to approximately 46.5° so that the side of the cutter is at 1.5° to the surface, thus avoiding damage when routing edges
• If you have milled the projecting edge of the top and bottom of the panel, you can trim the stuck edges with an easy adjustment of the machine, and if you tilt the machine to 45°, you can trim flat
• Routing with the straight cutter: The tiltable motor allows you to rout straight edges with the straight cutter (standard included) as well as projecting edges
• Excess panel material is milled with the body in vertical position and the edges with the body tilted at 91.5 ° so at 1.5 ° below the surface to avoid damage

Specifications FR 292

• Double insulation Input power: 750 W
• Max. cutter diameter: 25 mm
• Collet 8 mm
• No-load speed: 14,000-30,000/min
• Weight: 2,2 Kg

Includes

• 90 º Cutter for trimming and creasing (1140087)
• Straight cutter Ø 18 mm for trimming and scoring (1140016)
• Collet 8 mm
• Copy button with ball bearing
• Conductor
• Suitcase