Weka DK16/PRCD Diamond drill NAT with PRCD switch

Weka DK16P Diamond drill NAT with PRCD switch

• This wet drill has a very powerful motor and a motor protection
• The DK16 has a soft start via intellitronic
• Short base gives the dexterity to drill in any location
• For installers, contractors, construction companies etc. we recommend this version with PRCD switch

Intellitronic

• The microprocessor-controlled electronics allow the motor to start gently and thus prevent a high starting current
• When the machine is overloaded, the electronics do not immediately switch off the machine, but give the operator a signal through pulses that less pressure needs to be applied
• If you reduce the pressure the machine will continue normally, but if you keep the pressure on, the electronics will stop the drive after a short time. After this the machine can be started again immediately
• The inconvenient waiting as with a thermal protection is thus a thing of the past
• This way of working ensures that the temperature of the machine does not rise too high, thus preventing overloads and increasing operating comfort and the service life of the engine

Specifications

• Power 2000 watt
• Voltage 220 Volt
• Speed 540/1200/2520
• Drilling into brick up to 160 mm
• Drilling into concrete up to 140 mm
• Connection 1/2BSP female thread
• Weight 5,9 kg
• Aansuiting 1/2"

Includes

• Connection 1/2" internal thread
• Water tap with gardena connection
• Suitcase
• Loose handle
• 2 Machine keys
• PRCD switch
• CE Plug