Wiha 44319 Voltage and continuity tester eMobility 12 - 1,000 V AC, CAT IV

Wiha 44319 Voltage and continuity tester eMobility 12 - 1,000 V AC, CAT IV

When working on live parts, the absence of voltage must be checked before starting work. In addition to the usual activities of an electrician or electrician, this now also applies to work on electric carsand e-scooters, which is why the two-pole voltage detector also belongs to the basic equipment of every car workshop.

Description

• Thanks to its large measurement range of 12 to 1,000 V AC or 1,500 V DC and compliance with the highest safety level CAT IV, the voltage detector is also suitable for monitoring hybrid and electric vehicles and photovoltaic systems.
• During a measurement, thanks to the illuminated LED display, the voltage present is shown on an 8-level scale as well as as an effective value on the illuminated LCD display.
• The voltage locator and continuity tester additionally offers single-pole phase control, optical rotating field display and automatic polarity recognition.
• In addition, it allows quick one-handed inspection thanks to the integrated spacer.
• The two-pole voltage detector is also suitable for work in poorly lit working environments due to its integrated measuring point lighting.
• For added safety, a low battery condition is displayed directly on the LCD display.
• It is subject to EN 61010-1 and EN 61243-3:2014 standards.

Technical data

• Battery: 2x AAA batteries
• Voltage V AC min - max: 12 - 1000
• Voltage V DC min - max: 12 - 1500
• Pollution degree: 2
• Non-contact voltage test: No
• ATEX approval: No
• Suitable for photovoltaic installations No.
• Emobility compatible Yes
• Integrated flashlight No
• Ground fault test No
• Display LED and LCD screens
• Protection class IP 64
• Rotating field display LED L, R
• Passage test LED and acoustic tone
• Operating temperature -15°C - 40°C
• Storage temperature -20°C - 70°C
• Height above NAP 2000m
• Single-pole phase control 100 - 700 V AC
• Rotary level control 170 - 1,000V phase to phase
• Continuity test Measuring range 0 - 500 kΩ + 50%.
• LED ELV display > 50 VAC, > 120 V DC
• LCD range 4-digit LC display
• LCD resolution 1 V
• LCD accuracy +/- 3%, +/- 3 digits
• LCD overflow display OL
• Actual time 1 s
• Safety current < 3.5 mA (at 1,000 V)
• Measurement mode 30 s ON (operating time), 240 s OFF (recovery time)
• Battery consumption approximately 80 mA
• Humidity max 85 % RH
• Acoustic signal Yes
• Overall length (mm) 282