Wiha 45216 Voltage and continuity tester 12 - 1,000 V AC, CAT IV

Wiha 45216 Voltage and continuity tester 12 - 1,000 V AC, CAT IV

The voltage and continuity tester from Wiha is your ideal companion to easily check this condition of the safety rules and support you in frequent demands in your everyday professional life.

Description

• It enables voltage testing in the comfortable measuring range of 12 to 1,000 V AC or 1,500 V DC. In addition, it offers the possibility of continuity testing, optical rotary field testing, unipolar testing and automatic polarity detection.
• The measurement results are easy to read thanks to an LED display.
• An additional audio tone signals conduction in the continuity test.
• In addition, one-handed checking of outlets can be conveniently performed using the integrated spacer.
• In addition, thanks to the integrated flashlight function, the voltage detector from Wiha offers optimal light conditions even in poorly lit work environments. Simultaneous pressing of the buttons on both handles of the check points enables the function check of the ground fault circuit interrupter by switching on a load.
• Conforming to measurement categories CAT III to 1,000 V and CAT IV to 600 V, the voltage detector and continuity tester from Wiha offers maximum safety for work in the area of building installation as well as directly at sources of low-voltage installation.

Technical data

• Battery: 2x AAA batteries
• Voltage: V AC min - max 12 - 1000
• Voltage: V DC min - max 12 - 1500
• Pollution degree: 2
• Non-contact voltage test: No
• ATEX approval: No
• Suitable for photovoltaic installations: No
• Emobility compatible: No
• Integrated flashlight: Yes
• Ground fault test: Yes
• Display:Led screen
• Protection class: IP 64
• Rotary field display: LED L, R
• Passage test: LED and acoustic tone
• Operating temperature: -15°C - 50°C
• Storage temperature: -20°C - 60°C
• Height above sea level: 2000m
• Single-pole phase control: 100 - 700 V AC
• Rotational level control: 170 - 1,000 V phase-to-phase AC 50/60 Hz
• Throughput test: Measuring range 0 - 500 kΩ + 50%
• LED ELV display: > 50 VAC, > 120 V DC
• LCD range: -
• LCD resolution: -
• LCD accuracy: -
• LCD overflow display: -
• Actual time: < 0.5 s at 100% of rated value
• Safety current: < 3.5 mA (at 1,000 V)
• Measuring module: 30 s ON (operating time), 240 s OFF (recovery time)
• Battery consumption: about 80 mA
• Humidity: max 85% RH
• Acoustic signal: Yes
• Overall length (mm): 282