Wiha 45217 SB 255-17 Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV

Wiha SB 255-17 Voltage detector and continuity tester 0.5 - 1,000 V AC, CAT IV

Features

• Safety rule: establish absence of voltage!
• The voltage and continuity tester from Wiha is your ideal companion to easily check this condition of the safety rules and support you in frequent demands in your everyday professional life.
• It enables voltage testing for an extended measurement range of 0.5V to 1,000 V AC or 1,500 V DC.
• In addition, the voltage detector offers the possibility of the continuity test, the optical rotary field check, the unipolar test as well as automatic polarity recognition.
• In addition, resistance measurements and frequency measurements can be performed.
• The measurement results are immediately readable thanks to a large digital LCD display, backlit as well as an LED display.
• An additional audio tone signals conduction in the continuity test.
• In addition, one-handed monitoring of outlets can be conveniently performed using the integrated spacer.
• In addition, thanks to the integrated flashlight function, Wiha''s voltage detector offers optimal light conditions, even in poorly lit work environments.
• Simultaneous pressing of the keys on both handles of the control points allows the function check of the RCCB by switching on a load.
• Conforming to measurement categories CAT III to 1,000 V and CAT IV to 600 V, the voltage detector and continuity tester from Wiha offers maximum safety for work in the area of building installation as well as directly at sources of low-voltage installation.

Technical data

• Battery 2x AAA batteries
• Voltage V AC min - max 0.5 - 1000
• Voltage V DC min - max 0.5 - 1500
• Pollution degree 2
• Non-contact voltage test Yes
• ATEX approval No.
• Suitable for photovoltaic installations Yes
• Emobility compatible No
• Integrated flashlight Yes
• Ground fault test Yes
• Display LED and LCD screens
• Protection class IP 64
• Rotating field display LED L, R
• Passage test LED and acoustic tone
• Operating temperature -15°C - 50°C
• Storage temperature -20°C - 60°C
• Height above NAP 2000m
• Single-pole phase control 100 - 1,000 VAC (40 to 70 Hz)
• Rotary level control 170 - 7,000 V phase to phase AC 40-70 Hz
• Pass-through test Measuring range 0 - 500 k? + 50%
• LED ELV display > 50 V AC, > 120 V DC
• LCD range 0.5 V to 1,000 V AC, 0.5 V to 1,500 V DC LCD resolution 0.1 V (< 10 V) and 1 V (> 10 V)
• LCD accuracy +/- 3%, +/- 3 digits (< 10 V) and +/- 3%, +/- 5 digits (> 10 V)
• LCD overflow display OL
• Actual time < 0.5 s LED and < 1 s LCD
• Safety current < 3.5 mA (at 1,000 V)
• Measurement mode 30 s ON (operating time), 240 s OFF (recovery time)
• Battery consumption approximately 80 mA
• Humidity max 85 % RH
• Acoustic signal Yes
• Overall length (mm) 282