Wolfcraft 6871000 clamping and machine table MASTER 750 ERGO 680 x 700 x 950 mm

Wolfcraft 6871000 clamping and machine table MASTER 750 ERGO 680 x 700 x 950 mm

Whether you use it as a tensioning or machine table - in terms of versatility and ergonomics, everything about the MASTER 750 ERGO from wolfcraft is hard to beat. The table can be adjusted in six steps to the desired height between 725 - 950 mm. This facilitates work and prevents back pain. Thanks to the locking points (each level) and the pull-out protection, the MASTER 750 ERGO also offers maximum safety while working with machines. The cut and/or mitre saws or the wolfcraft drill stand, Art. No. 5027000 and 3406000, can simply be fixed to the table top.

A huge advantage of the MASTER 750 ERGO is the quick adjustment system. There are levers under the table top. By pulling the right and left levers, the quick adjustment system is unlocked and the front table top can be quickly and smoothly moved toward the workpiece. Then all that is required is to turn the cranks 2 to 3 times and the workpiece is already firmly clamped. Slow and laborious workpiece turning is no longer necessary. As a clamping table, the MASTER 750 ERGO offers a horizontal span of 130 mm between the table tops and 425 mm between the four plastic clamping jaws supplied. When the table is set to maximum height, the workpiece (up to 110 mm wide) can be clamped vertically without problems.

The clamping jaws possess a lacquer tip that can be turned over: very useful for time-consuming lacquer work. If the workpiece is to be raised, the pin side with anti-slip should be used. With the two additional pipe aligners, even round workpieces can be solidly secured. Also as a work table, the MASTER 750 ERGO excels in working comfort and flexibility. The adjustable table top made of coated MDF (FSC-certified) with bevelled edges has a variable working surface of 680 x 390-520 mm. In addition, the table top can be infinitely rotated 60°, if the table is used as a worktable.

The stable base consists of high-quality tubular steel and features a quick-fold system for flexible transport and space-saving storage. Thanks to the non-slip rubber feet, the table stands securely against the wall when folded up. Despite its high load capacity (up to 125 kg), the MASTER 750 ERGO weighs only 13.2 kg. The convenient hand recess with bevelled edge and the oval, smooth aluminum bar allow the table to be transported comfortably. All details of the clamping table have ergonomic advantages: the clamping jaws of plastic or tools can be clamped and stored in the tool rail with pre-formed holders.

The MASTER 750 ERGO is delivered with pre-assembled base elements, so the table can be set up and used uncomplicated and quickly upon receipt. Thanks to the high quality ''''Made in EU'''', the product has a long service life (10-year warranty). The MASTER 750 ERGO has been tested by TÜV - you have chosen a product of high quality.

Bijzondere kenmerken

• Height adjustable in six steps from 725 - 950 mm for ergonomic working
• Locking points and pull-out protection for safety while working with machines
• Attachment possibilities for chop and/or mitre saws and for the wolfcraft drill stand, Art.-No. 5027000 and 3406000, for versatile and ergonomic chores
• Quick adjustment system for smooth and quick shifting of the front table top
• Up to 60° rotatable table top (infinitely variable) for versatile application possibilities
• Vertical clamping of workpieces up to 110 mm width (at highest table setting)
• Clamping width of 130 mm between table tops, 425 mm between plastic clamping jaws for horizontal clamping
• 4 large clamping jaws made of plastic with non-slip surface - with reversible paint tip for fast painting of workpieces + pin with non-slip surface for raising the workpiece
• 2 pipe clamps for clamping round material
• With quick-fold system for transport and space-saving storage
• Base made of stable, tu