Gys 5192031210 GYSMI E200 FV Welding inverter set in case

GYS 5192031210 GYSMI E200 FV Welding inverter set in case

Welding device GYSMI E200 FV features the inverter technology, microprocessor controlled with a digital control panel and display. The device is connected to a simple 16A-230V plug even during intensive use.

Special features

• Easy welding with all electrodes: steel, stainless steel, cast iron, rutile or basic (Ø1.6 to 5 mm)
• Anti-Sticking
• Adjustable Hot Start: Easy start with all metal types (Low Hot start = thin plates / High Hot start = for difficult to weld metals: oxidized or contaminated pieces)
• Arc force: Temporarily higher intensity that penetrates better and avoids the risk of sticking
• HOT START: start current increase when switching on
• ANTI STICKING: prevents sticking and annealing of the electrode
• ARC FORCE: prompt current increase in difficult welding situations

Technical data

• Type: Inverter
• Model: MMA welder
• Connection voltage: 230 V
• Length: 270 mm
• Width: 210 mm
• Height: 140 mm
• Frequency: 50/60 Hz
• Number of phases: 1
• Weight: 9.3 kg
• Max. amperage: 200 A
• Degree of protection (IP): Other
• Fuse (slow blow): 20 A
• Operating temperature: -10 / 40 °C
• Continuously adjustable: No
• Max. load capacity at 100% (electrode): 200 A
• Max. load capacity at 100% (TIG): 200 A
• No-load voltage: 96 V
• Welding current (electrode): 10 / 200 A
• Welding voltage (electrode): 20.4 / 28 V
• Welding current (TIG): 10 / 130 A
• Welding voltage (TIG): 10.4 / 15.2 V
• Suitable for tungsten electrode diameter: 1.6 / 5 mm

Scope of delivery

• GYSMI E200 FV
• Ignition cable (1.6m / Ø16mm²)
• Electric cable (2m / Ø16mm²)