Kärcher 1.645-501.0 SP 2 Flat Flat Suction Drainage Pump

Kärcher 1.645-501.0 SP 2 Flat Flat Suction Drainage Pump

Processes up to 6,000 l/h, pumps out water up to 1 mm and makes the surface mop-dry: The SP 2 Flat entry-level flat suction submersible pump for clear to slightly contaminated water.

Special characteristics

• The SP 2 Flat flat suction dewatering pump reliably pumps clean to slightly contaminated water with dirt particles up to 5 millimeters in size
• With a capacity of up to 6,000 l/h, the pump is ideal for emptying smaller pools or basements that have been flooded by rising groundwater or a leak in the washing machine
• A robust ceramic sliding ring seal ensures an extra long life
• An extended five-year warranty is also available
• A float switch switches the pump on and off automatically, depending on the water level, thus preventing dry running
• And because you can attach the float switch, the pump can run continuously even when the water level is low
• The SP 2 Flat is equipped with legs that you can fold to realize a larger capacity
• When the feet are folded in, the submersible clean water pump starts pumping at a water level of 7 millimeters
• After which it is pumped in continuous operation to 1 millimeter for a mop-dry result
• And the Quick Connect connecting thread allows 1 1/4 hoses to be connected quickly and easily
• Front face ceramic sliding ring seal
• For an extra long run time
• float switch
• Automatically switches the pump on and off depending on the water level, prevents dry running
• Quick Connect
• Connection thread for quick and easy connection of 1 1/4" hoses to the pump
• Foldable legs
• Switching from normal operation with a higher capacity to recording up to 1 mm with a mop-dry result
• Automatic ventilation
• The pump starts working in manual mode from a water level of 7 cm
• Possibility to fix the float switch
• For switching to continuous operation
• Comfortable carrying handle
• Comfortable handle and can also be used to secure a rope
• Robust and easy to attach pre-filter as an accessory
• Protects the pump from contamination and prevents the pump wheel from clogging

Technical data

• max. power : 250 W
• Water yield max. : 6000 l/h
• Head / pressure max. : 5 / 0.5 m/bar
• max. pumping depth : 7 m
• max. grain size : 5 mm
• Residual height of water : 1 mm
• Flow temperature, max. : 35 °C
• Connection wire : G1
• Power cable : H05RN-F / 10 /m
• Voltage : 230 - 240 V
• Frequency : 50 Hz
• Weight without accessories : 3.8 kg

Included

• Comfortable carrying handle
• Hose connector, 1 1/4''
• Quick Connect for quick and easy connection of hoses
• Switching between manual/automatic operation, Possibility to lock float switch
• Switch to flat extraction