Makita DF003GZ XGT 40 V Max Drill/screwdriver excl. batteries and charger in box

Makita DF003GZ XGT 40 V Max Drill/screwdriver excl. batteries and charger in box

Now a total of 5 years warranty on Makita DF003GZ Machines(*)

(*) on top of Makita's factory warranty ( 3 years after registration with Makita ) you will receive 2 years TOOLPLUS* warranty extra from us.

ToolNation TOOLPLUS* Warranty: 2 years extra toolplus warranty on power tools

Special features

• Extremely strong for heavy-duty drilling/screwing jobs with larger diameters.
• 2 functions: screwing and drilling.
• 3 mechanically adjustable speeds (650/1800/2400 min-¹) for precise drilling (e.g. hole saws)
• Medium setting (1800 min-¹) for fast screwing in of large screws up to 8×400 mm in Douglas fir or spruce.
• At sudden reduction in speed or when the drill bit gets stuck in the material, Active Feedback sensing Technology (AFT) kicks in and switches off the machine.
• Equipped with electronic slip clutch with 25 positions in high, 30 in medium and 41 in low speed.
• Rotary wheel in the base to quickly set desired torque digitally.
• Strong machine yet compactly built.
• Suitable for outdoor use, due to eXtreme Protection Technology (XPT) well protected against penetration of dust and moisture.
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control.
• Communication between machine and battery maximizes machine operation and battery protection.
• Comfortable to use thanks to good machine balance and the ergonomic, soft-grip covered handle.

Technical data

• Connection/holder: 13 mm keyless chuck with spindle lock
• Chuck clamping adaptor: 1.5 - 13 mm
• Counterclockwise, clockwise rotation: Yes
• Slipping clutch positions: 41 positions
• Adjustable torque range (approx.): 1 - 45 Nm
• Tightening torque soft / hard: 88 / 150 Nm
• Wood screw/bolt Ø: 10 mm
• Screw length: 90 mm
• Variable speed control (switch): Yes
• Number of mechanical positions: 3
• No load speed (position 1): 0 - 650 min-¹
• No load speed (position 2): 0 - 1800 min-¹
• No load speed (position 3): 0 - 2400 rpm
• Aluminum gear housing: Yes
• Volt (voltage): 36 V
• Motor type: BL motor (brushless)
• Dimensions (l × w × h): 196 × 86 × 284 mm

Scope of delivery

• 1x drill/screwdriver
• 1x Bit magazine
• 1x Side handle for drill/screwdriver
• 1x Screw bit Sl-PH2

*Toolnation is the only Makita supplier to extend the warranty from 3 to 5 years. We will take over the warranty terms after the 3rd year has expired and are maintained by us in our computer system.

Dealer warranty:

Toolnation is an official Makita dealer and offers you full warranty according to Makita's terms and conditions.

It is important for you as a customer that you purchase a product with full warranty. In practice, it appears all too often that articles are offered via various websites for lower prices. These are often machines from abroad that are often converted. This can result in malfunctions or even fire. Manufacturers' warranty on these products is therefore usually non-existent or a maximum of 12 months. Therefore, always ensure that you buy from an official brand dealer! At Toolnation you are assured of this!

"