Makita DLX2590TJ Combiset LXT 18V DHP492 (impact) drill/screwdriver + DTW300 impact wrench 18V incl. 2x5.0Ah and quick charger in Mbox case

Combiset LXT 18V DHP492 (impact) drill/screwdriver + DTW300 impact wrench 18V incl. 2x5.0Ah and quick charger in Mbox case

Now a total of 5 years warranty on Makita DHP492 and DTW300 Machines(*)

(*) on top of the Makita factory warranty ( 3 years after registration with Makita ) you will receive 2 years TOOLPLUS* warranty extra. ToolNation TOOLPLUS* Warranty: 2 years extra toolplus warranty on power tools

Special features

• Set consists of two machines in an Mbox:
• DHP492: Strong, robust and durable (impact) drill/screwdriver for tough jobs.
• DTW300: Impact wrench with 4 adjustable speeds for matching torque to the workpiece.

Advantages DHP492

• Extremely strong and durable for the toughest jobs.
• Equipped with new generation brushless motor; more powerful and energy efficient.
• 3 functions: screwdriving, drilling and impact drilling.
• Constant in its speed and power during workload. Even at heavier loads.
• High ergonomic working comfort due to excellent machine-battery balance and comfortable soft grip.
• Extremely durable thanks to brushless motor: lower heat development and higher protection.
• Extra durable thanks to protection against overload and deep discharge.
• Equipped with double LED lighting for even better visibility.

Advantages DTW300

• Impact wrench with 4 adjustable speeds for matching torque to workpiece.
• Equipped with ½" square connection with friction ring and hole for locking pin.
• 3 bolt positions: Prevents over-tightening of bolts and Auto stop mode when turning in reverse.
• Auto stop mode when reversing. Machine stops automatically once the bolt or nut is sufficiently loosened or can continue to turn at low speed.
• Equipped with variable speed control in the switch.
• Equipped with maximum speed function, when partially pressing the switch, speed goes to maximum.
• Digitally adjustable: all-round machine with wide range of connections (M10-M18).
• Very compact and well balanced, therefore extremely manageable in awkward places.
• Durable: well protected from dust and moisture due to unique construction.
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control.
• Strong connection head to machine through 4 screws to better absorb intensive blows.
• Maximum strength of 330 Nm.
• Durable thanks to protection against battery overload, overheating and deep discharge.

Technical data DHP492

• Connection/holder: 13 mm keyless chuck with spindle lock
• Chuck clamping adaptor: 1.5 - 13 mm
• Wood screw/bolt: Ø 10 mm
• Screw length: 90 mm
• Metal spiral drill bit: Ø 1.5 - 13 mm
• Hole saw: Ø 14 - 152 mm
• Wood spiral drill bit: Ø 3 - 20 mm
• Stone drill bit: Ø 3 - 16 mm
• Counterclockwise and clockwise rotation: Yes
• Slip clutch positions: 21 positions
• Adjustable torque range (approx.): 1 - 12 Nm
• Torque soft / hard: 65 / 130 Nm
• Variable speed control (switch): Yes
• Number of mechanical speeds: 2
• No load speed (position 1): 0 - 550 min-¹
• No load speed (position 2): 0 - 2100 min-¹
• Number of strokes (position 1): 0 - 8250 min-¹
• Number of strokes (position 2): 0 - 31500 min-¹
• Type of motor: BL motor
• Aluminum gear housing: Yes

Technical data DTW300

• Connection/accessory: 1/2" square
• Standard bolt/screw metric: 10 - 20 mm
• High-tensile bolt/screw metric: 10 - 16 mm
• Variable speed control (switch): Yes
• Variable speed control (digital): Yes
• Counterclockwise auto stop mode: Yes
• Maximum torque:
  • Position 1: 70 Nm
  • Position 2: 160 Nm
  • Position 3: 210 Nm
  • Position 4: 330 Nm
• Maximum disassembly torque: 580 Nm
• Counterclockwise and clockwise rotation: Yes
• Speed no load:
  • Position 1: 0 - 1000 min-¹
  • Position 2: 0 - 1800 min-1¹
  • Position 3: 0 - 2600 min-1¹
  • Position 4: 0 - 3200 min-1¹
• Number of strokes:
  • Position 1: 0 - 1800 min-¹
  • Position 2: 0 - 2600 min-1¹
  • Position 3: 0 - 3400 min-1¹
  • Position 4: 0 - 4000 min-1¹
• Number of electric revolutions: 4

Scope of delivery

• 1x (impact) drill/screwdriver (DHP492)
• 1x Impact wrench (DTW300)
• 1x Depth stop (122576-8)
• 1x Quick charger (195584-2)
• 2x Battery BL1850B 5Ah (197280-8)
• 1x Carrying hook long various machines (346317-0)
• 1x Bit magazine (452947-8)
• 1x Mbox3 (821551-8)
• 1x Case insert/inlay combination set (837864-7)
• 1x Handle assy DHP492 (122F12-0)
• 1x Screw bit PH2xSL6x45mm (784614-0)

*Toolnation is the only Makita supplier to extend the warranty from 3 to 5 years. We take over the warranty terms after the 3rd year expires and are maintained by us in our computer system.

Dealer warranty:

Toolnation is an official Makita dealer and offers you full warranty according to Makita's terms and conditions.

It is important for you as a customer that you purchase a product with full warranty. In practice, it appears all too often that articles are offered via various websites for lower prices. These are often machines from abroad that are often converted. This can result in malfunctions or even fire. Manufacturers' warranty on these products is therefore usually non-existent or a maximum of 12 months. Therefore, always ensure that you buy from an official brand dealer! At Toolnation you are assured of this!