Makita DTL300Z LXT 18V Cordless Angle Impact Wrench 1/2" excl. battery and charger in box

Makita DTL300Z LXT 18V Accu Angle Impact Wrench 1/2" excl. battery and charger in box

The LXT 18V angle impact wrench with 1/2" square connection with friction ring and locking pin delivers a maximum torque of 340 Nm. Suitable for metric connections from M10 to M18. Thanks to the compact angle head of 81 mm, you reach even hard-to-reach places. With three adjustable speeds and auto stop mode, you easily adjust the tightening torque to the connection.

The machine with BL motor lies comfortably in the hand thanks to its narrow, non-slip housing and is excellently balanced. Additional user benefits include LED lighting, variable speed control, electric motor brake and XPT protection against penetration of dust and moisture.

Special features

• LXT 18 V Angle impact wrench 1/2"
• Equipped with ½" square connection with friction ring and hole for locking pin.
• Compact angle head of 81 mm: difficult to reach places are now accessible.
• Impact wrench with 3 adjustable speeds for matching torque to workpiece.
• Auto stop mode prevents over-tightening of bolts and automatically stops when turning backwards.
• With built-in LED light that stays on for 10 seconds after releasing the switch. Adjustable in 3 strengths and switchable.
• Equipped with variable speed control in the switch.
• Machine stops almost instantly due to electric motor brake.
• Maximum 340 Nm strength (after 6s striking).
• Digitally adjustable: all-round machine with wide range of connections (M10-M18).
• Very compact and well balanced, therefore extremely manageable in awkward places.
• Easy to handle due to narrow housing and covered with anti-slip rubber for grippy work.
• Well protected against penetration of dust and moisture by eXtreme Protection Technology (XPT).
• Durable, energy-efficient and maintenance-free carbon brushless motor with electronic control.
• Durable thanks to protection against overload, overheating and deep discharge of the battery.

Technical data

• Platform: LXT 18 V
• Connection/holder: 1/2" square
• Standard bolt/screw metric: 10 - 20 mm
• High-tensile bolt/screw metric: 10 - 16 mm
• Variable speed control (switch): Yes
• Variable speed control (digital): Yes
• Counterclockwise auto stop mode: Yes
• Maximum torque (position 1): 90 Nm
• Maximum torque (position 2): 200 Nm
• Maximum torque (position 3): 340 Nm
• Maximum disassembly torque: 530 Nm
• Counterclockwise, clockwise rotation: Yes
• Idle speed (position 1): 0 - 1,000 min-¹
• Speed no load (position 2): 0 - 1,500 min-¹
• No load speed (position 3): 0 - 3.200 min-¹
• Number of strokes (position 1): 0 - 1.800 min-¹
• Number of strokes (position 2): 0 - 2,800 min-¹
• Number of strokes (position 3): 0 - 4.000 min-¹
• Volt (voltage): 18 V
• Type of motor: BL motor
• Number of electric revolutions: 3
• Lighting: Yes
• Softgrip: Yes
• Electric brake: Yes
• Battery protection: Yes
• Dimensions (l × w × h): 414 × 80 × 92 mm
• Vibration when mounting up to max.: 14.4 m/s²
• Vibration uncertainty (K) when mounting: 1.5 m/s²
• Sound pressure level (LpA): 100 dB(A)
• Uncertainty (K) LpA: 3 dB(A)
• Sound power level (LWA): 108 dB(A)
• Uncertainty (K) LwA: 3 dB(A)
• Weight: 1.45 kg
• Weight with low LXT 18 V battery: 1.8 kg
• Weight with high LXT 18 V battery: 2.1 kg